Error-Free
We make sure that the design we make for your water cooled HVAC system is in line with your design brief and specifications.
Efficient
Long-Lasting
We understand that such a system is a major investment, which is why our design also focuses on superior durability and longevity.
Why You Should Avail of Our Design Services?
- Our custom designs will help you customize your system. While you can find a number of ready-made systems from reliable manufacturers, there could be instances where their systems might be lacking some components which you might deem necessary for your building. Since our designs are tailored to your specifications, you will be able to enjoy some features that most ready-made systems might be lacking.
- Another major reason is cost-saving. In most cases, ready-made systems tend to be a lot more expensive than custom systems. This can sometimes be due to some features which aren’t really necessary for your building but can add to the system’s overall cost.
- You will be able to have a foolproof system with our designs. Since our designers are experienced in the field of manufacturing, engineering, and plumbing, you can rest easy knowing that they will provide you with a foolproof system through the final blueprint. Also, considering that we will collaborate with you during the designing process, it means that you can have the ability to pinpoint any errors that might be present and have them fixed before you even start with the manufacturing process.
- Lastly, you can enjoy a highly efficient system in terms of efficiency and cost-effectiveness. This means that you can save a lot on your electric bills since your system will use less energy consumption.
System Components In Our Designs
- PTAC Design Services
- Window Air Conditioner Design
- Steam Pressure Reducing Valve Station
- Steam Radiators Design
- Chilled Beams Design
- Hot Water Radiators Design
- Building Automation System Design
- Building Management System (BMS) Design
- Exhaust Fan Design
- Cooling Tower MEP Design
- Water Pump Systems Design
- Glycol System Services Design
- Radiant Heat Design
- NYE Boiler Design Services
- Chiller System Design
- Dual Fuel Boiler Design
- Centrifugal Chiller Design
- Absorption Chiller MEP Design
Why Choose Us?
Here are the reasons why you should hire us for your design needs:
- Team of Professionals : Nearby Engineers is a team that’s made up of experienced professionals in the field of MEP (manufacturing, engineering, plumbing) and BIM (business information modeling). This means that all of our designers and engineers are all well-versed in the trade.
As such, you can have peace of mind knowing that your project is left in the hands of experts.
- Friendly and Approachable Staff : We always strive to establish good relationship with our clients, and this is something we at Nearby Engineers are proud of. All of our staff are friendly and approachable; hence, you can expect topnotch customer service.
Our excellent customer support representatives will always be there to answer your inquiries. Meanwhile, our designing team who will collaborate with you will make sure that they can maintain communication and even go as far as explaining to you the technical terminologies which you might find complicated.
- Latest and Innovative Tools : The MEP industry is an ever-growing industry with the advancement and introduction of new technology. Due to this, we make sure to use only the latest tools and software for all of our design projects.
Though our experienced designers have already mastered a variety of tools such as Revit and AutoCAD, they still continue learning new techniques, especially when newer, better tools are introduced. This will ensure that your water cooled system design won’t be outdated.
- Quick Turnaround Time : We understand that you also have your deadline to meet. For that, we make sure to deliver the work as quickly as possible without compromising its quality. We always respect deadlines and make sure to adhere to them. This allows you to go on with your construction project without any delay.
- Custom and Budget-Friendly Rates : We do offer a number of design packages in accordance with your current budget. Aside from that, we also offer custom rates tailored to your project.
- Zero Errors : We always make sure that the final design for your project will come out as error-free. This is made possible by using advanced tools and software as well as collaborating with you during the design process. By requesting for your initial feedback, we’ll be able to correct any issues and make adjustments to come up with an error-free output.
This allows you to have a highly efficient water cooled system for your building which is free of any operational errors which could cost you hundreds or even thousands of dollars.
Work with Us Now!
We at Nearby Engineers are always willing to help with anything related to MEP design. If you’re looking for a reliable team to help you with your project, then we are the ones you’re looking for. We ensure that you can get only the best quality for all your MEP needs.
You can get your water cooled HVAC system done right with our expert designers and engineers. We will make sure to be there with you from the beginning of the process right until the end. We can even provide you with several suggestions with regard to your HVAC system.
Don’t hesitate to get in touch with us. You can contact us using our hotline or send us a form via the Contact Us page.
Agencies Approvals We Secure
- Department Of Buildings (DOB)
- NFPA
- FDNY
- OER Approval
- HPD
- DEP
- Electrical Review Board
- National Electrical Committee (NEC)
Water Cooled System Design
A water cooled HVAC system is widely used in a lot of buildings, whether residential or commercial, as it rejects heat absorbed by the evaporator’s refrigerant.
Here at Nearby Engineers , we understand how complicated a water cooled HVAC system design can be, not to mention there are several considerations to make when it comes to compliance with energy regulations and building codes.
However, our expert engineers and designers are experienced in the field of MEP and BIM, so we can assure to deliver only the best water cooled HVAC system designs based on our clients’ exact specifications.
Water Cooled System Design
Water cooled systems can be considered superior to their air cooled counterparts since they can run at lower condensing temperatures. This is because water comes with higher specific heat than air.
However, water cooled systems are rarely used in residential installations due to their higher equipment cost, high maintenance requirements, and high installation costs.
Here at Nearby Engineers , we provide water cooled HVAC system designs for each of the three types of water cooled systems. They’re as follows:
In this design, however, minerals which accumulated on the coil can’t be cleaned mechanically. The only means to do so is by using chemicals for flushing them out.
2. Tube-within-a-Tube : The tube-within-a-tube design has an inner tube inserted to a larger outer tube. This design is widely used in most buildings as it’s very easy to manufacture.
In this design, water flows through the inner tube, cooling the refrigerant which flows in the outer tube. Alternatively, we at Nearby Engineers can design the inner tube with a grooved design to further increase heat transfer between the water and the refrigerant.
3. Shell and Tube : Lastly, the shell and tube type comes with a steel shell containing a lot of copper tubes inside. However, due to the relatively high cost it entails, it’s mainly used only in AC systems with higher capacity. In fact, only a few of our clients actually prefer having this design due to its costs.
Why Consider a Water Cooled HVAC System Design?
In recent years, water cooled systems have experienced a considerable rise in their usage, mainly among small business and residential applications. Some the reasons why they’re being used are as follows:
- Water cooled systems are far more efficient. This is mainly because they use far less overall energy. As a result, you can experience massive savings on energy consumption and utility bills.
- They have a longer lifespan due to the medium’s efficiency. Also, since our water cooled system designs ensure that the parts are not exposed to outdoor elements, you can expect your system to last for many years. Of course, this is as long as you conduct regular maintenance.
- If you’re planning to install the system in a building which is located in areas with high temperatures, you’ll find that it will operate more effectively. This is quite beneficial particularly in high-temp cities such as Riyadh.
Our Design Process
We understand that water cooled systems play an important role in your building’s heating, cooling, and ventilation. Due to that, we make sure that during the design process, we can create a foolproof design and try to get rid of any issues and complications before we can call it final.
If you’re interested, here is how we proceed with our design service:
Site Inspection : After we are able to gather all the necessary information regarding your design, we will then conduct a site inspection. This is to ensure that we can get the exact measurements of your building. Doing so will allow us to accurately scale the design in accordance with your building’s dimensions.
We will send our inspection team to do this. They’ll also ask some important questions with regard to your construction project.
Designing : The design process will commence once we’re able to gather all of the necessary information regarding your design, i.e. design brief, site inspection, etc. During the designing stage, we will gather our team of experienced designers and engineers, particularly those who are experts in creating a water cooled system design.
After that, we will provide them with all the information and design brief so they can carry out the entire process seamlessly. Since our team uses only the latest tools designed for the BIM industry, we are confident that we can give you a high-quality design for your water cooled system.
Initial Feedback and Collaboration : Once our team of designers comes up with an initial blueprint, we will then show it to you. We will also conduct team collaboration, so we can correct any possible issues and flaws that might be present.
During this stage, we will try to tackle any errors and perform any adjustments and revisions where possible. By doing this, we can get rid of any flaws and create a thorough 3D presentation, so you can have a glimpse of what the system will look like once you have it manufactured.
Upon receiving your initial feedback, we will then make the appropriate changes as soon as possible.
Finalization : If you are satisfied with the revisions and adjustments, we will then send you the final design. The design you receive will be deemed final with all the necessary revisions performed. Since we’ve already done several water cooled system design projects before, we are confident that our final design will be infallible.
Our Design Process
- Heat Recovery System Design
- Custom Air Handling Unit Design
- Ventilation System Design
- Outside Air System Design
- Sub Slab Depressurization System
- Laboratory Exhaust System
- Commercial Kitchen Hood Exhaust
- Net Zero Certified
- Riser Diagram
- Pressure Drop Calculations
- Equipment Sizing
- Thermal Load Calculations
- Violation Removal
- Cogeneration System Design
- Trigeneration System Design
Customized Design Services
- Tiny House Design
- Landmarks Building Design
- Modular Building Design
- Prefab Building Design
